How To Change Your Motherboard Battery

First the safety rules!

The inside of a computer is a bad place full of electricity and sharp edges.
On the electricity side always when working on you computer make sure that it’s still plugged in to the power socket and the power is turned off, this is to ensure that any static
From you is discharged through the earth. The inside of most computer cases are unfinished metal and has very sharp edges so be careful.

The first signs of a battery failing are:

• Your clock starts running slowly
• When you boot (start) your computer it has a problem finding your hardware (no hard drive, no cd rom)

To change the battery you need the following tools:

• a X-point screwdriver
• an anti-static strap(optional)
• a new battery (seems logical)

Then unplug all the cables from the back of the computer as you remove them make a note where they came from. (So when you finished you can put them back).

Move the computer somewhere where you can work on it with ease
Remove the cover by locating the screws around the outer edge (back) of the computer
Some computer cases only require you to remove 2 screws on one side then a panel can be removed allowing you access to the computers insides, others you must remove 6 screws and remove the whole case by sliding it to the rear and lifting it off.


Now make sure that you read the safety instructions about static.
Look inside you will see a round silver thing that looks about the size of a 10p piece (quarter). This is the battery itself, carefully lift the retaining clip and slide the battery out. That’s it removed now go to your local computer retailer, electrical retailer (Tandy/Radio shack) taking the old battery with you and get a new battery.
Back to your computer insert the new battery by lifting the clip and sliding the battery in.

Reinstall your case and plug all the cables back (you did remember to label them didn’t you)
Turn on your PC. You will now need to go into you bios….
Right the bios is the god of your computer. To access it, when your computer first starts you will see a black screen with white text.
If you look carefully you will see a line that says something like "press del for setup" or some other key (F2 or ESC or tab) this will take you to god's house where you can make lots of changes to the way your machine works.


It is also the place where you can make your nice computer in to a rather expensive door stop so be careful and don’t go playing with anything.
You will now be presented with a blue screen with a lot of options on it, the one we want is Load Optimised / Default settings.
Press the F10 key for save setting and type Y, the computer should now reboot.
If every thing went well then your computer will now be up and running.

Extreme way (NOT RECOMMENDED):

• Keep computer running.
• Lay it on it's side and remove side cover to expose Motherboard.
• Take any thin object, "small screwdriver, knife point, wood shiskabob skewer.
• Pull back the battery retaining clip.
• Toss the old battery in the junk receptacle, unless you belong to Greenpeace and want to save the earth.
• Install the new battery. No need to reset bios becasue the compter supplies voltage to the CMOS while it is running.
• Reset or resync clock with internet. Done!

Cracking Password Protected Zip Files

What is FZC?

FZC is a program that cracks zip files (zip is a method of compressing multiple files into one smaller file) that are password-protected (which means you’re gonna need a password to open the zip file and extract files out of it). You can get it anywhere - just use a search engine such as google.com.

FZC uses multiple methods of cracking - bruteforce (guessing passwords systematically until the program gets it) or wordlist attacks (otherwise known as dictionary attacks. Instead of just guessing passwords systematically, the program takes passwords out of a “wordlist”, which is a text file that contains possible passwords. You can get lots of wordlists at www.theargon.com.).

FZC can be used in order to achieve two different goals: you can either use it to recover a lost zip password which you used to remember but somehow forgot, or to crack zip passwords which you’re not supposed to have. So like every tool, this one can be used for good and for evil.

The first thing I want to say is that reading this tutorial… is the easy way to learn how to use this program, but after reading this part of how to use the FZC you should go and check the texts that come with that program and read them all. You are also going to see the phrase “check name.txt” often in this text. These files should be in FZC’s directory. They contain more information about FZC.

FZC is a good password recovery tool, because it’s very fast and also supportcomputer turned on until you get the password, like it used to be some years ago with older cracking programs. You would probably always get the password unless the password is longer than 32 chars (a char is a character, which can be anything - a number, a lowercase or undercase letter or a symbol such as ! or &) because 32 chars is the maximum value that FZC will accept, but it doesn’t really matter, because in order to bruteforce a password with 32 chars you’ll need to be at least immortal..heehhe.. to see the time that FZC takes with bruteforce just open the Bforce.txt file, which contains such information. resuming so you don’t have to keep the

FZC supports brute-force attacks, as well as wordlist attacks. While brute-force attacks don’t require you to have anything, wordlist attacks require you to have wordlists, which you can get from www.theargon.com. There are wordlists in various languages, various topics or just miscellaneous wordlists. The bigger the wordlist is, the more chances you have to crack the password.

Now that you have a good wordlist, just get FZC working on the locked zip file, grab a drink, lie down and wait… and wait… and wait…and have good thoughts like “In wordlist mode I’m gonna get the password in minutes” or something like this… you start doing all this and remember “Hey this guy started with all this bullshit and didn’t say how I can start a wordlist attack!…” So please wait just a little more, read this tutorial ’till the end and you can do all this “bullshit”.

We need to keep in mind that are some people might choose some really weird passwords (for example: ‘e8t7@$^%*gfh), which are harder to crack and are certainly impossible to crack (unless you have some weird wordlist). If you have a bad luck and you got such a file, having a 200MB list won’t help you anymore. Instead, you’ll have to use a different type of attack. If you are a person that gives up at the first sign of failure, stop being like that or you won’t get anywhere. What you need to do in such a situation is to put aside your sweet xxx MB’s list and start using the Brute Force attack.

If you have some sort of a really fast and new computer

and you’re afraid that you won’t be able to use your computer’s power to the fullest because the zip cracker doesn’t support this kind of technology

, it’s your lucky day! FZC has multiple settings for all sorts of hardware

, and will automatically select the best method.

Now that we’ve gone through all the theoretical stuff, let’s get to the actual commands.

Bruteforce

The command line you’ll need to use for using brute force is:

fzc -mb -nzFile.zip -lChr Lenght -cType of chars

Now if you read the bforce.txt that comes with fzc you’ll find the description of how works Chr Lenght and the Type of chars, but hey, I’m gonna explain this too. Why not, right?… (but remember look at the bforce.txt too)

For Chr Lenght you can use 4 kind of switches…

-> You can use range -> 4-6 :it would brute force from 4 Chr passwors to 6 chr passwords
-> You can use just one lenght -> 5 :it would just brute force using passwords with 5 chars
-> You can use also the all number -> 0 :it would start brute forcing from passwords with lenght 0 to lenght 32, even if you are crazy i don’t think that you would do this…. if you are thinking in doing this get a live…
-> You can use the + sign with a number -> 3+ :in this case it would brute force from passwords with lenght 3 to passwords with 32 chars of lenght, almost like the last option…

For the Type of chars we have 5 switches they are:

-> a for using lowercase letters
-> A for using uppercase letters
-> ! for using simbols (check the Bforce.txt if you want to see what simbols)
-> s for using space
-> 1 for using numbers

Example:
If you want to find a password with lowercase and numbers by brute force you would just do something like:

fzc -mb -nzTest.zip -l4-7 -ca1

This would try all combinations from passwords with 4 chars of lenght till 7 chars, but just using numbers and lowercase.

*****
hint
*****

You should never start the first brute force attack to a file using all the chars switches, first just try lowercase, then uppercase, then uppercase with number then lowercase with numbers, just do like this because you can get lucky and find the password much faster, if this doesn’t work just prepare your brain and start with a brute force that would take a lot of time. With a combination like lowercase, uppercase, special chars and numbers.

Wordlist

Like I said in the bottom and like you should be thinking now, the wordlist is the most powerfull mode in this program. Using this mode, you can choose between 3 modes, where each one do some changes to the text that is in the wordlist, I’m not going to say what each mode does to the words, for knowing that just check the file wlist.txt, the only thing I’m going to tell you is that the best mode to get passwords is mode 3, but it takes longer time too.
To start a wordlist attak you’ll do something like.

fzc -mwMode number -nzFile.zip -nwWordlist

Where:

Mode number is 1, 2 or 3 just check wlist.txt to see the changes in each mode.
File.zip is the filename and Wordlist is the name of the wordlist that you want to use. Remember that if the file or the wordlist isn’t in the same directory of FZC you’ll need to give the all path.

You can add other switches to that line like -fLine where you define in which line will FZC start reading, and the -lChar Length where it will just be read the words in that char length, the switche works like in bruteforce mode.
So if you something like

fzc -mw1 -nztest.zip -nwMywordlist.txt -f50 -l9+

FZC would just start reading at line 50 and would just read with length >= to 9.

Example:

If you want to crack a file called myfile.zip using the “theargonlistserver1.txt” wordlist, selecting mode 3, and you wanted FZC to start reading at line 50 you would do:

fzc -mw3 -nzmyfile.zip -nwtheargonlistserver1.txt -f50

Resuming

Other good feature in FZC is that FZC supports resuming. If you need to shutdown your computer and FZC is running you just need to press the ESC key, and fzc will stop. Now if you are using a brute force attack the current status will be saved in a file called resume.fzc but if you are using a wordlist it will say to you in what line it ended (you can find the line in the file fzc.log too).
To resume the bruteforce attack you just need to do:

fzc -mr

And the bruteforce attack will start from the place where it stopped when you pressed the ESC key.
But if you want to resume a wordlist attack you’ll need to start a new wordlist attack, saying where it’s gonna start. So if you ended the attack to the file.zip in line 100 using wordlist.txt in mode 3 to resume you’ll type

fzc -mw3 -nzfile.zip -nwwordlist.txt -f100

Doing this FZC would start in line 100, since the others 99 lines where already checked in an earlier FZC session.

Well, it looks like I covered most of what you need to know. I certainly hope it helped you… don’t forget to read the files that come with the program

20 Great Google Secrets

Google is clearly the best general-purpose search engine on the Web

But most people don’t use it to its best advantage. Do you just plug in a keyword or two and hope for the best? That may be the quickest way to search, but with more than 3 billion pages in Google’s index, it’s still a struggle to pare results to a manageable number.

But Google is an remarkably powerful tool that can ease and enhance your Internet exploration. Google’s search options go beyond simple keywords, the Web, and even its own programmers. Let’s look at some of Google’s lesser-known options.

Syntax Search Tricks

Using a special syntax is a way to tell Google that you want to restrict your searches to certain elements or characteristics of Web pages. Google has a fairly complete list of its syntax elements at:

www.google.com/help/operators.html

Here are some advanced operators that can help narrow down your search results.

Intitle: at the beginning of a query word or phrase (intitle:”Three Blind Mice”) restricts your search results to just the titles of Web pages.

Intext: does the opposite of intitle:, searching only the body text, ignoring titles, links, and so forth. Intext: is perfect when what you’re searching for might commonly appear in URLs. If you’re looking for the term HTML, for example, and you don’t want to get results such as

www.mysite.com/index.html

You can also enter intext:html.

Link: lets you see which pages are linking to your Web page or to another page you’re interested in. For example, try typing in

link:http://www.hungry-hackers.com

Try using site: (which restricts results to top-level domains) with intitle: to find certain types of pages. For example, get scholarly pages about Mark Twain by searching for intitle:”Mark Twain”site:edu. Experiment with mixing various elements; you’ll develop several strategies for finding the stuff you want more effectively. The site: command is very helpful as an alternative to the mediocre search engines built into many sites.

Swiss Army Google

Google has a number of services that can help you accomplish tasks you may never have thought to use Google for. For example, the new calculator feature

(www.google.com/help/features.html#calculator)

Lets you do both math and a variety of conversions from the search box. For extra fun, try the query “Answer to life the universe and everything.”

Let Google help you figure out whether you’ve got the right spelling—and the right word—for your search. Enter a misspelled word or phrase into the query box (try “thre blund mise”) and Google may suggest a proper spelling. This doesn’t always succeed; it works best when the word you’re searching for can be found in a dictionary. Once you search for a properly spelled word, look at the results page, which repeats your query. (If you’re searching for “three blind mice,” underneath the search window will appear a statement such as Searched the web for “three blind mice.”) You’ll discover that you can click on each word in your search phrase and get a definition from a dictionary.

Suppose you want to contact someone and don’t have his phone number handy. Google can help you with that, too. Just enter a name, city, and state. (The city is optional, but you must enter a state.) If a phone number matches the listing, you’ll see it at the top of the search results along with a map link to the address. If you’d rather restrict your results, use rphonebook: for residential listings or bphonebook: for business listings. If you’d rather use a search form for business phone listings, try Yellow Search

(www.buzztoolbox.com/google/yellowsearch.shtml).

Extended Googling

Google offers several services that give you a head start in focusing your search. Google Groups

(http://groups.google.com)

indexes literally millions of messages from decades of discussion on Usenet. Google even helps you with your shopping via two tools: Froogle
CODE
(http://froogle.google.com),

which indexes products from online stores, and Google Catalogs
CODE
(http://catalogs.google.com),

which features products from more 6,000 paper catalogs in a searchable index. And this only scratches the surface. You can get a complete list of Google’s tools and services at

www.google.com/options/index.html

You’re probably used to using Google in your browser. But have you ever thought of using Google outside your browser?

Google Alert

(www.googlealert.com)

monitors your search terms and e-mails you information about new additions to Google’s Web index. (Google Alert is not affiliated with Google; it uses Google’s Web services API to perform its searches.) If you’re more interested in news stories than general Web content, check out the beta version of Google News Alerts

(www.google.com/newsalerts).

This service (which is affiliated with Google) will monitor up to 50 news queries per e-mail address and send you information about news stories that match your query. (Hint: Use the intitle: and source: syntax elements with Google News to limit the number of alerts you get.)

Google on the telephone? Yup. This service is brought to you by the folks at Google Labs

(http://labs.google.com),

a place for experimental Google ideas and features (which may come and go, so what’s there at this writing might not be there when you decide to check it out). With Google Voice Search

(http://labs1.google.com/gvs.html),

you dial the Voice Search phone number, speak your keywords, and then click on the indicated link. Every time you say a new search term, the results page will refresh with your new query (you must have JavaScript enabled for this to work). Remember, this service is still in an experimental phase, so don’t expect 100 percent success.

In 2002, Google released the Google API (application programming interface), a way for programmers to access Google’s search engine results without violating the Google Terms of Service. A lot of people have created useful (and occasionally not-so-useful but interesting) applications not available from Google itself, such as Google Alert. For many applications, you’ll need an API key, which is available free from
CODE
www.google.com/apis

Thanks to its many different search properties, Google goes far beyond a regular search engine. Give the tricks in this article a try. You’ll be amazed at how many different ways Google can improve your Internet searching.

Online Extra: More Google Tips

Here are a few more clever ways to tweak your Google searches.

Search Within a Timeframe

Daterange: (start date–end date). You can restrict your searches to pages that were indexed within a certain time period. Daterange: searches by when Google indexed a page, not when the page itself was created. This operator can help you ensure that results will have fresh content (by using recent dates), or you can use it to avoid a topic’s current-news blizzard and concentrate only on older results. Daterange: is actually more useful if you go elsewhere to take advantage of it, because daterange: requires Julian dates, not standard Gregorian dates. You can find converters on the Web (such as

CODE
http://aa.usno.navy.mil/data/docs/JulianDate.html

excl.gif No Active Links, Read the Rules - Edit by Ninja excl.gif), but an easier way is to do a Google daterange: search by filling in a form at

www.researchbuzz.com/toolbox/goofresh.shtml or www.faganfinder.com/engines/google.shtml

If one special syntax element is good, two must be better, right? Sometimes. Though some operators can’t be mixed (you can’t use the link: operator with anything else) many can be, quickly narrowing your results to a less overwhelming number.

More Google API Applications

Staggernation.com offers three tools based on the Google API. The Google API Web Search by Host (GAWSH) lists the Web hosts of the results for a given query

(www.staggernation.com/gawsh/).

When you click on the triangle next to each host, you get a list of results for that host. The Google API Relation Browsing Outliner (GARBO) is a little more complicated: You enter a URL and choose whether you want pages that related to the URL or linked to the URL

(www.staggernation.com/garbo/).

Click on the triangle next to an URL to get a list of pages linked or related to that particular URL. CapeMail is an e-mail search application that allows you to send an e-mail to google@capeclear.com with the text of your query in the subject line and get the first ten results for that query back. Maybe it’s not something you’d do every day, but if your cell phone does e-mail and doesn’t do Web browsing, this is a very handy address to know.

Vodafone Hack for Free GPRS

I have been asked by many Vodafone Users

to post a Method to get a free GPRS for the Vodafone. Nobody wants to pay for what he/she uses. I am also a Nobody so I was also in trying out all the things to get free GPRS for Vodafone users since I am also a Vodafone User. Finally I have got a Full proof way to get free GPRS for all the Vodafone Users. This method has been tested on different mobiles and has been confirmed to be working. Still if anybody faces any problem please contact me and I will try to solve it as quickly as possible.

Followng are the Settings you require to configure on your Mobile:

Account Name: Vodafone_gprs
Homepage: http://live.vodafone.in
User Name: (no need)
Pass: (no need)

Access Point Settings:

Proxy: Enabled
Proxy Address: 10.10.1.100
Proxy Port: 9401
Data Bearer: Packet Data

Bearer Settings:

Packet Data Access Point: portalnmms
Network type: IPV4
Authentication: normal
User Name: (no need)
Password: (no need)

*IF that happen this settings is not working then change the proxy port number to:-

Proxy Port: 9401