This article will help you to change your IP address within a minute. Just follow the following step and you will be thru.
1. Click on "Start" in the bottom left hand corner of screen
2. Click on "Run"
3. Type in "command" and hit ok
You should now be at an MSDOS prompt screen.
4. Type "ipconfig /release" just like that, and hit "enter"
5. Type "exit" and leave the prompt
6. Right-click on "Network Places" or "My Network Places" on your desktop.
7. Click on "properties"
You should now be on a screen with something titled "Local Area Connection", or something close to that, and, if you have a network hooked up, all of your other networks.
8. Right click on "Local Area Connection" and click "properties"
9. Double-click on the "Internet Protocol (TCP/IP)" from the list under the "General" tab
10. Click on "Use the following IP address" under the "General" tab
11. Create an IP address (It doesn't matter what it is. I just type 1 and 2 until i fill the area up).
12. Press "Tab" and it should automatically fill in the "Subnet Mask" section with default numbers.
13. Hit the "Ok" button here
14. Hit the "Ok" button again
You should now be back to the "Local Area Connection" screen.
15. Right-click back on "Local Area Connection" and go to properties again.
16. Go back to the "TCP/IP" settings
17. This time, select "Obtain an IP address automatically"
tongue.gif 18. Hit "Ok"
19. Hit "Ok" again
20. You now have a new IP address
With a little practice, you can easily get this process down to 15 seconds.
P.S:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back.
Windows Group Policy (gpedit.msc)
Group Policies is a powerful area in windows base system where you can control what users can do and cannot do. Unfortunately in windows XP you have a slight problem as all these group policies will apply to the Administrator account as well. Reason behind this is Windows XP dose not support domain users like windows Server versions. Still you can use gpedit.msc or Group Policies to define limitations for users.
How to get control over Group Policies?
Method 1: (Click) Start > (Click) run > (type) gpedit.msc > (Press) Enter
Windows Drive
Ø (Select) Windows Component
Ø (Select) Windows Messenger
Ø (Double click) Do not allow windows Messenger to be run
Ø (Select) Enable
Ø (Click) Apply
Ø (Double click ) Do not automatically start Windows Messenger initially
Ø (Select) Enable
Ø (Click) Apply
These gpedit tricks will come handy if you want to control IE settings.
You can find the gpedit setting in the following location
Administrative Templates
>Windows Component
>>Internet Explorer
Some Interesting Settings
Enable Disable changing home page settings will disable uses changing the home page. First change the Internet Explorer Home page to what you want and enable this.
Enable Disable changing of Auto-Proxy scripts
Enable Disable changing Advanced Page Settings will add more security
Enable Disable changing proxy settings will stop users changing the proxy Settings from IE.
Administrative Templates
>Windows Component
>>Internet Explorer
>>> Toolbars
Disable customizing browser toolbar buttons & Disable customizing browser toolbar will stop users adding or deleting any toolbar buttons or doing any changes to the toolbar.
Administrative Templates
>Windows Component
>>Internet Explorer
>>> Internet Control Panel
Disable the Security page
Disable the Content page
Disable the Connection page
Disable the Programs page
Disable the Privacy page
Disable the Advanced page
These setting will come handy if you want to block someone being changing the Security setting, Privacy Setting and Advance settings for Internet Explorere.
In Windows XP operating system if you change any Windows group policy setting it just apply it to Administrator account as well. Especially if you restrict some access to hard drive partition or Run Command it restrict for Administrator as well. That depends on the setting you apply is a user account policy or machine policy. Normally Machine policy will apply to all the users. You can control user account policies base on users. However, Windows XP dose not support domain users like Windows server versions so even user account policies will apply to all the users.
I am using a simple trick to solve this issue. Not 100% but it makes life easier. In the beginning I just mention to copy a shortcut of gpedit.msc to the desktop. Reason behind that is when you play with Windows group Policies it is very easy to hide or prevent access to your hard drives. You will notice it after you restart your machine. Now you do not have access to gpedi.msc. You might have prevent access to “Run” as well.
Trick 1: If you done something like above situation you can simply solve it by creating a shortcut manually.
Right click on the desktop and go to “new” and select “shortcut”. It will ask you to give a path. If you have prevent access to your hard drive then you will not able to select the path so just select some other target like Desktop and click “Finish”.
Right click on the shortcut that you created and select properties and fill the details for gpedit.msc
Default Values
Target: C:\WINDOWS\system32\gpedit.msc
Start in: C:\WINDOWS\system32\
Click “Apply” and it will create a shortcut for gpedit.msc and now you will able to access gpedit.msc and change Group Policy
Trick 2: Use Trick 1 and before you disable any Program or Hard Drive you can create a short cut in Desktop. It will allow you to access these programs while other uses do not have any access.
Example: Prevent Access to Computer Hard Drives
First create a short cut to the Drives you going to hide or prevent access.
Then open the gpedit.msc [Start > Run > (type) gpedit.msc > Enter]
In Group Policy > User Configuration > Administrative Template > Desktop > Enable the “Remove My Computer icon on the Desktop”
If you need specific driver to be hidden you can go to In Group Policy > User Configuration > Administrative Template > Windows Component > Windows Explorer > and select the specific drivers from “hide these specific drivers from My Computer”
If you prevent access for My Computer, shortcuts will not be working.
How to get control over Group Policies?
Method 1: (Click) Start > (Click) run > (type) gpedit.msc > (Press) Enter
Ø (Select) Windows Component
Ø (Select) Windows Messenger
Ø (Double click) Do not allow windows Messenger to be run
Ø (Select) Enable
Ø (Click) Apply
Ø (Double click ) Do not automatically start Windows Messenger initially
Ø (Select) Enable
Ø (Click) Apply
These gpedit tricks will come handy if you want to control IE settings.
You can find the gpedit setting in the following location
Administrative Templates
>Windows Component
>>Internet Explorer
Some Interesting Settings
Enable Disable changing home page settings will disable uses changing the home page. First change the Internet Explorer Home page to what you want and enable this.
Enable Disable changing of Auto-Proxy scripts
Enable Disable changing Advanced Page Settings will add more security
Enable Disable changing proxy settings will stop users changing the proxy Settings from IE.
Administrative Templates
>Windows Component
>>Internet Explorer
>>> Toolbars
Disable customizing browser toolbar buttons & Disable customizing browser toolbar will stop users adding or deleting any toolbar buttons or doing any changes to the toolbar.
Administrative Templates
>Windows Component
>>Internet Explorer
>>> Internet Control Panel
Disable the Security page
Disable the Content page
Disable the Connection page
Disable the Programs page
Disable the Privacy page
Disable the Advanced page
These setting will come handy if you want to block someone being changing the Security setting, Privacy Setting and Advance settings for Internet Explorere.
In Windows XP operating system if you change any Windows group policy setting it just apply it to Administrator account as well. Especially if you restrict some access to hard drive partition or Run Command it restrict for Administrator as well. That depends on the setting you apply is a user account policy or machine policy. Normally Machine policy will apply to all the users. You can control user account policies base on users. However, Windows XP dose not support domain users like Windows server versions so even user account policies will apply to all the users.
I am using a simple trick to solve this issue. Not 100% but it makes life easier. In the beginning I just mention to copy a shortcut of gpedit.msc to the desktop. Reason behind that is when you play with Windows group Policies it is very easy to hide or prevent access to your hard drives. You will notice it after you restart your machine. Now you do not have access to gpedi.msc. You might have prevent access to “Run” as well.
Trick 1: If you done something like above situation you can simply solve it by creating a shortcut manually.
Right click on the desktop and go to “new” and select “shortcut”. It will ask you to give a path. If you have prevent access to your hard drive then you will not able to select the path so just select some other target like Desktop and click “Finish”.
Right click on the shortcut that you created and select properties and fill the details for gpedit.msc
Default Values
Target: C:\WINDOWS\system32\gpedit.msc
Start in: C:\WINDOWS\system32\
Click “Apply” and it will create a shortcut for gpedit.msc and now you will able to access gpedit.msc and change Group Policy
Trick 2: Use Trick 1 and before you disable any Program or Hard Drive you can create a short cut in Desktop. It will allow you to access these programs while other uses do not have any access.
Example: Prevent Access to Computer Hard Drives
First create a short cut to the Drives you going to hide or prevent access.
Then open the gpedit.msc [Start > Run > (type) gpedit.msc > Enter]
In Group Policy > User Configuration > Administrative Template > Desktop > Enable the “Remove My Computer icon on the Desktop”
If you need specific driver to be hidden you can go to In Group Policy > User Configuration > Administrative Template > Windows Component > Windows Explorer > and select the specific drivers from “hide these specific drivers from My Computer”
If you prevent access for My Computer, shortcuts will not be working.
How to: Remove Braviax.exe manually.
I don’t trust all the free scanners I find when I Google “Remove Braviax.exe” or “Braviax.exe”. Most of them are another adware or spywae. Otherwise it will only scan your computer for free and ask money to remove them. Therefore I always trust couple of good antivirus and spyware programs like Norton (Not free but you can use the trial for 90 days) AVG (100% free and cool).
Then always there is a manual removal for each spy ware, virus or antivirus. You need go back and remove the registry and couple of files and folders from your computer.
Braviax.exe is another Trojan horse that can affect any version of windows (Windows 98, Windows 95, Windows XP, Windows Me, Windows Vista, Windows NT, Windows Server 2003 or Windows 2000).
If your computer is infected with Bravia.exe it will pop up windows warning style message saying
“Your computer is infected!
Windows has detected spyware infection!It is recomended to use special antispyware tools to prevent data loss. Windows will now download and install the most up-to-date antispyware for you.Click here to protect your computer from spyware!”
Removal Instructions
Update your antivirus program and do a full scan. If you don’t have any you can download AVG Antivirus and spy ware removal for free.
Then clean every threat found by your antivirus and get ready for a manual removal.
Go to windows file search and do a search for “Braviax” and do a full search and delete all the files you find. Braviax.exe in windows\system32 folder and figaro.sys are few of common file I found
Then go to registry edit (start> run> type “regedit” > enter) and do search (ctrl + f or go to “Edit” and the select Find) then search for “braviax” delete all the registry key found under that name. (Take a backup in any case if something goes wrong but remembers it is infected)
This is one of the common records in registry you can navigate to this location and remove it. However I have found couple of extra records in the registry when I have couple of users in my computer and if those accounts are infected. I think search for braviax and delete record is more effective.
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run\"braviax" = "%System%\braviax.exe"
Restart your computer and everything should be fine.
Web cam hack - Google web cam hack
How cool will it be to hack someone else web cam without them knowing. It is pretty scary though knowing that someone can hack your web cam and see what you do in front of the computer.
I have seen many videos in Youtube and Metacafe but still I could not figure out software, tool or a method to hack a web cam. But I know it is not impossible.
For example if you view other persons webcam you just have to get his or her permission. That is totally controlled by Microsoft Messenger. Logically if you know the IP and if there is a web cam connect to that computer you should be able to view it.
There are many other possibilities to view IP cameras. By default most of the known IP camera software allow web access to the cameras that enables you to access from anywhere around the world. Normally it will not give any password protection at all. Unfortunately or fortunately Google and other major Search engines will index it as they are not been told to skip these pages. So everyone who knows the small trick can see indexed IP cameras around the world. You never know what you can find in these cameras.
You don’t want to be a hacker to hack web cams. Only thing you need to know is how to search “Google camera hack” in Google and get the video tutorials or step by step guides.
I think I should not put it here but I will give couple of examples.
Copy and Paste the italic words on Google. Search in Google there are lots more ways to get the indexed web cams.
Brimsoft cameras - intitle:"Biromsoft WebCam" -4.0 -serial -ask -crack -software -a -the -build -download -v4 -3.01 -numrange:1-10000
Supervisor cam - intitle:"supervisioncam protocol"
Netsnap cameras - intitle:"Live NetSnap Cam-Server feed"
WebcamXP - intitle:"powered by webcamXP" intitle:"ProBroadcast"
EvoCam - intitle:"EvoCam" inurl:"webcam.html"
there will be plenty of more here if search in Google.
However, still I need to figure out a way to hack a web cam without using Google. I know you want to hack your friends, girl friends or boy friends web cam. It will be more fun than hacking your friend’s msn, yahoo or Gmail account.
I have seen many videos in Youtube and Metacafe but still I could not figure out software, tool or a method to hack a web cam. But I know it is not impossible.
For example if you view other persons webcam you just have to get his or her permission. That is totally controlled by Microsoft Messenger. Logically if you know the IP and if there is a web cam connect to that computer you should be able to view it.
There are many other possibilities to view IP cameras. By default most of the known IP camera software allow web access to the cameras that enables you to access from anywhere around the world. Normally it will not give any password protection at all. Unfortunately or fortunately Google and other major Search engines will index it as they are not been told to skip these pages. So everyone who knows the small trick can see indexed IP cameras around the world. You never know what you can find in these cameras.
You don’t want to be a hacker to hack web cams. Only thing you need to know is how to search “Google camera hack” in Google and get the video tutorials or step by step guides.
I think I should not put it here but I will give couple of examples.
Copy and Paste the italic words on Google. Search in Google there are lots more ways to get the indexed web cams.
Brimsoft cameras - intitle:"Biromsoft WebCam" -4.0 -serial -ask -crack -software -a -the -build -download -v4 -3.01 -numrange:1-10000
Supervisor cam - intitle:"supervisioncam protocol"
Netsnap cameras - intitle:"Live NetSnap Cam-Server feed"
WebcamXP - intitle:"powered by webcamXP" intitle:"ProBroadcast"
EvoCam - intitle:"EvoCam" inurl:"webcam.html"
there will be plenty of more here if search in Google.
However, still I need to figure out a way to hack a web cam without using Google. I know you want to hack your friends, girl friends or boy friends web cam. It will be more fun than hacking your friend’s msn, yahoo or Gmail account.
Subscribe to:
Posts (Atom)
Posts
